arezoo

Barley package repair:

Creating an error and displaying error codes in the Barley package means that there is a problem in your heating system. If you are unable to diagnose and repair your package by reading this article, leave the repair of your Barley package to the experts of Tehran Online Service.
Our company with a brilliant history in the field of Barley package repairs is ready to serve you all over the capital.

Barley package error code:

Barley company is one of the reliable brands, which has performed well in the field of heating systems production. This company has implemented an intelligent troubleshooting system in its packages to help diagnose its packages.
Error codes are displayed in different ways on different devices. In old devices, this was done by turning on the backlight or beeping. But in new generation heating systems that are often equipped with displays, error codes appear in English letters on the screen. One of the advantages of these codes over other methods is the possibility of transmitting more information about the error related to the type of problem or scope. its occurrence.

Barley package error code list:
Error code Meaning of error code Possible causes
E02 Low water pressure in the CH system, there is not enough pressure in the radiator for efficient and correct operation
E04 DHW temperature sensor error If this error occurs in the hot water sensor, the NTC is defective
E05 Radiator temperature sensor error The NTC sensor is defective
E13 Warning related to the exhaust gas temperature sensor due to excessive temperature. This error is related to the accumulation of exhaust gases in the adjustment cap.
E14 Exhaust gas temperature sensor error The electronic card has detected an imbalance in the exhaust
E15 The chimney fan error is blocked, the fan does not work, the air compressor is broken
rE06 Igniter error, ignition electrode failure, gas valve, electronic board
rE08 Failure to detect the flame, the presence of air in the gas supply path, ionization rod failure, gas valve failure, electronic board failure
rE07 Thermostat error, excessive temperature limit in the device
E09 Operation without water in the radiator circuit, there is a leak in the radiator circuit or inside the device, the device is not charged by the filling valve.
E10 AUX output sensor failure Sensor failure
E16 sensor failure AUX return sensor failure
E11 Gas valve modulator electrical connection disconnected, internal error, gas valve is broken
E17 Maximum temperature error related to the temperature sensor between two NTCs, insufficient water circulation, sensor failure
E19 Select WFC by reading input of internal failure current meter
rE28 Lock count error The lock count has reached the limit and you need to reset
E37 The error related to the low wattage of the input power voltage is lower than the expected value
E40 Power grid frequency error Fluctuation in power frequency

Fixing Barley package errors at home:

If an error occurs in your Barley package, first reset the package or disconnect it from the power supply. Wait for 5 to 10 minutes. Reconnect the package to the electricity, if you see an error, you should contact Barley package expert.
Click here to read the LG package repair article.
Preventing errors in Barley package:

To prevent errors in your Barley package, it is enough to service your package every 6 months. The service of the package must be done by an experienced serviceman every 6 months. Most of the problems caused in wall packages are due to the accumulation of debris inside the package. , which can be solved by acid washing and descaling of the package.