arezoo

Error or error codes consist of English letters and numbers that appear on the screen of your refrigerator when there is a problem with the refrigerator. In this article, we are going to check the errors of the Beko side by side refrigerator and guide you with how to We will introduce the necessary actions and actions when these errors occur, so stay with us for the rest of this article and contact Tehran online service consultants if needed.Beko fridge freezer errors

https://medium.com/@arezooahmadi7470/beko-fridge-freezer-errors-28339e7bcdb0

Reading this article will help you to easily diagnose the cause of any problem in the Beko refrigerator. In the following, we review the errors of the Beko refrigerator. By knowing the cause of the error and how to fix it, you can easily go to the source of the problem and fix it without having to check all the parts of the refrigerator.

Beko fridge freezer error code E0

The cause of the error is the cause of the error E01. Malfunction of the freezer resistor

2. The compressor and freezer fan work continuously.

The troubleshooting of the E0 error code of the Beko refrigerator is as follows:

It is shown if the measured sensor value is open circuit or closed circuit.
If the sensor value is correct (neither open nor closed), the error is removed.
Check wiring and circuit connections.
Check the electronic board and major control.

Beko fridge freezer error code E1

Error code, cause of error E11. Malfunction of the freezer defrost sensor

2. The element is left on for 25 minutes during normal defrosting.

How to fix the error code E1 of the Beko refrigerator is as follows:

Check the Beko refrigerator’s defrost sensor.
Parts such as thermodisc and thermofuse should also be checked and replaced if necessary.
Also check the electronic board and repair and replace it if it is damaged.
The element and fan inside the freezer may also have a problem.
Check the fan blades and fix them if there are any problems.
Finally, you may need to replace the defrost sensor.

Beko refrigerator error E3 error code

Error code, cause of error E31. Malfunction of the sensor or resistor of the refrigerator. The reflective plate must remain open for 3 minutes and close for 7 minutes. The refrigerator bar graph display turns off. The sensor reading, either open or closed, is incorrect.

The way to fix the E3 error code of the Beko refrigerator is as follows:

Check the wiring and connections of the refrigerator circuit.
If necessary, replace the humidity sensor or temperature sensor.
It is also necessary to check the electronic board.

Beko fridge freezer error code E4

Error code, cause of error E4, failure of the heater or the defrosting element, if the defrosting time is equal to the maximum defrosting time, i.e. 60 minutes, this error is shown for 3 consecutive defrosts. The control function is usually performed by the defrost heater.

How to fix error code E4 of Beko refrigerator is as follows:

Check the wiring and connections.
Check the element or the heater continuously to make sure it is not in trouble.
Finally, check the electronic board and the defrost sensor.

Refrigerator and side-by-side Beko refrigerator error, error code E8

The error code of the cause of the error E8, the failure of the ice maker sensor, is shown if the module considers the sensor’s value as an open circuit or a closed circuit. In these cases, the ice maker will no longer work.

How to fix the E8 error code of the Beko refrigerator is as follows:

To solve the problem of the Beko side-by-side refrigerator, first check the ice maker sensor.
Replace it if needed.
It is also possible that the board is damaged and you need to repair or replace it.

Refrigerator and side-by-side Beko refrigerator error E9 error code

Error Code Cause of Error E9 Malfunction of the ice maker If the switch does not change, as explained during installation, or rotate the device, or if the state of the switch does not change within 1 minute, the ice maker should not operate.

How to fix the error code E9 of the Beko refrigerator is as follows:

Check the internal wiring and connections between the electronic board and the ice maker sensor.
Check the ice maker completely.

Fridge freezer and side by side Beko error code 2

Error code ERROR 2 error in the defrost system, how to fix error code 2 in the Beko side-by-side refrigerator and freezer is as follows:

Check the refrigerator fan and fix it if there is a problem with its blades.
Also check the defrost sensor, thermodisc and thermofuse.
Check the compressor in the last step.
The compressor may not have enough compressor.
Finally, go to check the charge and gas.
The refrigerator door may have been left open for a long time

Beko refrigerator error, error code 3

The error code of the cause of the error ERROR 3, the fault in the heater element of the refrigerator, to fix the error code 3 in the refrigerator, freezer and side-by-side Beko is as follows:

Check the signs of failure of the heater element of the refrigerator.
If necessary, replace the element.

Beko fridge freezer error code 4

Error code, cause of error ERROR 4, error in one of the refrigerator sensors, in this case, check the electronic board first.

Beko fridge freezer error code 5

The error code, the cause of the error ERROR 5, the environmental temperature sensor failure, how to fix the error code 5 of the Beko refrigerator is as follows:

Check the temperature sensor.
Check the connection of the temperature sensor with the control board.
Check that the connectors are not weak.

Beko refrigerator error code 6

The error code of the cause of the error ERROR 6, the problem in the refrigerator buttons, how to fix the error code 6 of the Beko refrigerator freezer is as follows:

Check the buttons of the refrigerator and how to connect it.

Beko fridge freezer error code 7

Error code, cause of error ERROR 71. Error in the operation of the compressor

2. Refrigerant gas leakage
Beko fridge freezer error code 12
Error code, cause of error, ERROR 12, faults in the circuit of the switch, troubleshooting and fixing the error of the Beko fridge-freezer

Today, due to the high costs of refrigerator repairs, it is necessary to pay attention to and properly maintain the Beko refrigerator and freezer, and it increases the lifespan of the refrigerator. In some cases, problems may arise due to improper maintenance of the refrigerator. The reason for the failure of the refrigerator is usually shown in the form of errors and error codes of the Beko refrigerator on its display. These error codes can show which part of the device’s internal system is damaged and needs to be repaired. Therefore, if you see an error in the Beko refrigerator, you should follow the recommendations given to fix it. If the problem of the error and error code of Beko refrigerator is not solved, it is better to contact the authorized representative of Tehran Service Online to check the error and repair the Beko refrigerator.
How to fix Beko fridge freezer warning code at home?

Beko refrigerators are one of the famous brands in the domestic market that have been able to satisfy consumers. One of the unique features of these refrigerators is to display an error code on the screen if there is any problem in its internal system. These Beko refrigerator alarm codes indicate a problem with the device, and you can find out their meaning by referring to the manual of your device. Also, in this article, a Beko refrigerator error guide has been prepared for you, which can help you identify the problems of the device easily. Therefore, with the help of these tips, you can easily fix the error and error code of your refrigerator at home.
Conclusion about errors and errors of Beko refrigerator freezer

In this article, we tried to fully describe the errors and mistakes of the Beko refrigerator for you. You may come across an error that you cannot solve on your own, or even that error is not included in this article. In this case, contact the refrigerator repair shop so that the expert will come to your home as soon as possible.
Solutions to prevent errors in Beko refrigerators:

Considering the high price of home appliances, including side-by-side refrigerators, it is better to take care of your home appliances in the best way and be diligent in maintaining their health. For this, it is enough to have your refrigerator serviced once a year from an authorized repairer in Tehran. Ask the online service to be sent to the location to visit and ensure the health of your refrigerator’s operation.
Fixing the error of the Beko refrigerator in North Tehran:

Tehran online service, having a branch in the north of Tehran, has provided the possibility of dispatching force in less than an hour for the dear customers of the north of the city. Just call the phone number 22669196.
Fixing the error of the Beko refrigerator in West Tehran:

Dear fellow citizens living in the west of Tehran, just call 44284743 to register your orders to benefit from all the services of Tehran online service with a 6-month guarantee.
Fixing the Beko fridge freezer error in East Tehran:

Tehran provides online refrigerator repair service throughout the east of Tehran in the shortest period of time with a warranty and hot replacement parts. All services are based on union rates and are received from dear customers at the end of the work. Call 77241505
Fixing the error of the Beko refrigerator in the center of Tehran:

The experts of Tehran online service in all the central areas, even the areas with traffic plan, will be present in less than an hour and repair the refrigerator of our dear customers. Tehran online service warranty is issued for all repairs and dear customers get a 10% discount by being a member of our customer club. Phone number of the central branch is 66593368.
Fixing the Beko fridge freezer error in south of Tehran:

Tehran has established an online service for the well-being of its dear customers in the south of Tehran, establishing branches in this area with the contact number 55795434 and providing all refrigerator repair and installation services to its dear customers.